Kwik Sew 717
So if Butterick 6031 is not your grandma’s slip, Kwik Sew 717 totally is. Or at least, your mom’s. Ok, my mom’s. “Designed for knit and stretch fabric, nylon tricot” as the pattern proclaims. I eventually settled on this one out of the several stash contenders for my ivory “vintage” slip. However, I was also determined to use the 2m of lovely wide stretch lace I got at the same time, rather than just making the pattern up as-is. I think I like the result, but it definitely added another layer of complexity to a project that already had plenty of unknowns. First I decided I wanted to use my lace for the cups. This required some piecing, since the cups are one-piece and I wanted the scalloped edge of the lace to follow both the upper edges of the cups. I wouldn’t say I’ve done a lot of lace piecing, but I did a wee bit on Gertie’s slip (and more last summer, by hand), so I felt comfy stretching myself just a little bit more.
Lace piecing, with a narrow zig-zag stitch.
I cut chunks of lace long enough to overlap at the right angle and cover as much of the pattern-piece as possible. I pinned them in place at the correct angle so the scalloped edge would follow the top edges of the cup pattern piece. I put some tissue paper underneath for added stability, and then zig-zag stitched across the pieces, starting at the top point, to join them. I quite like it, lining up the pieces and zig-zagging along the edge of this motif or that—it’s kind of like a maze, finding your way across the fabric to where you’d like to end up. Excpept for the part where, on my first cup, I did an awesome job of following the outline of a rose which, it turned out, was on the side of the zig-zag that needed to be trimmed off, leaving some distinctly nonsensical and not-terribly-invisible zig-zags. I contemplated re-doing it, but at this stage in construction I wasn’t sure if I was even going to end up with a wearable garment, never mind a pretty one, and also THIS THING IS TOTALLY SEE-THROUGH NO ONE BUT ME AND OSIRIS IS EVER GOING TO SEE IT. Well, and now half the internet, but y’know.
See my awesome nonsense zigzag?
I made skinny self-straps, as suggested by the pattern. Oh, and they instructed you to use the bobby-pin method for turning! ACE!
With a bit of alteration, I figured I could make the upper back piece out of lace as well. The slip has an odd back with a curved seam partway down—interesting, and it gave me the opportunity to do some swayback altering, so that was nice, but it’s a bit random, especially since it’s not like the upper back piece is terribly fitted. But it looked nice out of lace.
The fit of the cups was interesting. There are two small darts on either side of a gathered portion along the top. And the sizing is about right for me in a bra (it takes a bit of padding to bring me up to standard pattern bust size), but the shape fits actually much better “au natural.” I do think the sizing would be better in the fashion fabric—the lace is pretty stretchy. A little too stretchy, really, but again. Experimentation and learning.
Back view, with lace panel
Anyway, once I had the cups pieced and the back cut, I still had quite a bit of lace left over, so I thought it would be a great idea to add a wide lace panel down the front. Gorgeous, right? 
Well, yes. Aside from the bit where the lace stretched more than the nylon and despite all my careful pinning there’s a bit of puckering that just won’t go away. And the width of the panel seems to alter the drape of the skirt, which isn’t entirely awesome. I’m hoping that the gorgeousness of the lace itself will carry it.
Slip front, imperfect drape, also not positioned on the dress-form terribly well.
Oh, wait. NO ONE’S GOING TO SEE THIS. This is the thing, every time I hit a snag or a problem with this piece, this kept occurring to me. Even if this is the most barely-wearable of wearable muslins, it’ll probably be a usable wardrobe staple. I should maybe also mention that I really struggled with the side-seams for this piece—they kept puckering. Eventually (the third time I redid them!) I stretched the hell out of the nylon tricot while I was sewing and that seemed to do it. The opposite problem of what I’m used to with knits. I should perhaps clarify here that I made this slip entirely on the standard sewing machine (going retro, natch). I used a narrow, short zig-zag (1.5 length, 3 width, if you’re interested) for pretty much everything. The Rocketeer’s manual recommended this, and also topstitching with the zig-zag after as a neat finish on lingerie. Then I trimmed any seam-allowances down to pretty much nothing. We’ll see how that holds up, anyway—it certainly looks nice for now. I wasn’t surprised, being a Kwik Sew, that the seam-allowances on the cups were only 1/4″, but I was a bit startled that the side-seam allowances were only 1/8″. That’s, like, barely there. Seriously. So no trimming was necessary down the sides. (This turned out to be a good thing, since I cut them off and re-sewed three times. I only lost a teeny bit each time.)
Pieced lace scallop along the hem.
I did a little more lace-piecing along the bottom of the lace strip, to get a nice bottom edge. Stretch lace is not the easiest for this kind of piecing, I think—I could’ve had a bit more tension on my pieced in bit. But, it looks pretty nice, and I don’t know how else I could’ve finished the edge.
Shell hem.
I played with a couple of hemming ideas—I had originally gotten a “matching,” somewhat narrower lace for the hem, but once I got it home it became obvious that it was much less shiny and much more white than my main lace. Not right. The pattern suggests a lettuce-edge (which is just a tight overcasting zig-zag while stretching the fabric), but I couldn’t get it to work without my fabric scooting to the side, so that wasn’t in the cards. So I settled for a shell hem, once I had looked up the settings on the Rocketeer and played with the stitch length. This fabric is absolutely made for a hem like this, I have to say. I’ve never had such a nice, even result. It’s a bit low-key compared to the crazy lace, but I think it works. OH AND NO ONE WILL SEE IT.
Random detail closeup. You can see my topstitched seamline.
So really, this slip was a learning experience, more than anything else. Practice with techniques and fabrics I haven’t used much. Fun, and weirdly low-key BECAUSE NO ONE WILL SEE IT. I actually want to do it all over again, right away, without the lace, just to see how that compares. And because I’m not entirely convinced the lace will work really well for under the white dresses. Being see-through ‘n all. And without all the fussing with lace-piecing, I think this would be a really quick, easy make.
Vogue 8912
I think slips might be a bit addictive, though. Aside from wanting to do this one all over again, I really want to try Vogue 8219 now, but it’s for a bias woven, and while I have a bit of ivory charmeuse kicking around somewhere, I don’t really think it’s enough. I love those seam-lines, though…
Tanit-Isis Sews 