So, it’s no secret that I have Issues with waistbands that sit at my waist. Above the waist is great, below the waist is fine, but waistbands that sit right at my waist—these are problematic. Especially if there’s going to be any kind of waist emphasis (like a belt), blousing above the waist, or gathering below. I always end up feeling cut in half, emphasizing both the width of my waist (2-3 sizes larger than the rest of me) and the shortness of my upper body.
Unfortunately for me, this describes roughly 90% of the dress patterns out there, and (even worse) a large percentage of the ones I’m dyingtomakerightnowdammit!
Now, I successfully made a dirndl-skirt sundress last summer by adding a dropped waist to a formerly straight-waisted pattern. And, despite being a fairly extreme example of stunt dressing, it was one of my favourite things to wear last summer. But a) this was a princess-seam pattern, and b) I used a shirred back, which allowed me to really fudge the fitting.
So, it appears, the sensible thing to do would be figure out a bodice template—a block, if you will—that I can morph onto these waist-length patterns to drop the waist slightly. Most of the ones I’m concerned with have a simple gathered or pleated skirt, which won’t be much affected by the addition of a few extra inches (and I’d probably be adding inches to the waist anyway).
When I was musing about this the other day (nothing like beating a topic to death 😉 ) I was thinking I would just try adding on to a pattern I already had—Simplicity 3965, say. Lauriana (one of the more fabulous pattern-drafters out there) sagely commented that perhaps it would be less trouble start with a longer bodice, perhaps a hip-length sloper drafted to my own measurements.
Now, obviously she was right, but my (vast and growing) pattern collection is a bit short on such a basic, at least with the length, fit, and dart positioning I wanted. I was, however, reminded of the fact that I had drafted a “fitted dress block” from the book Metric Pattern Cutting for Women’s Wear, by Winnifred Aldritch, a few months ago, which had languished un-tested on my hard-drive (I like to mess around with pattern drafting in Inkscape, usually when I am supposed to be doing something else). Partly because Aldritch was a bit vague, or at least confusing, on the issue of waist-shaping.
Anyway, with Simplicity 3965 giving me an idea of how much waist-shaping was required (at least above the waist), I set out on an odyssey. There was printing; tracing; tissue-fitting (on me and my dubious duct-tape double). Sway-back adjustments were made. I have confronted the horror of the shaped dart.
All for… this. /sigh.
Well, perfection has not been achieved, but I think I might be getting into the right ball-park. The shape (and breadth) of the rear darts is truly terrifying, but they are at least approaching doing the job (although it looks from the photos that the back is still a smidge tight—overall the bodice is quite comfortable. I’m not quite sure what to make of the side-wrinkles in the front, exccept that perhaps a bit more bust-shaping is in order. Additionally, the bust-dart is still about 1 cm high, and the side-seam falls a bit towards the back. I might moosh a teeny dart out of the front armscye to bring that in (or play with the shoulder slope some more).
Anyway, despite the imperfections (which are considerably more evident in the photos than in the mirror… not sure if that means it’s actually better in real life or worse than I had thought) I figured I had reached a point where I was ready to try using it on another pattern. I.E. Simplicity 3965.
Premature? Possibly, especially since I was thoroughly befuddled how to relate the narrow back dart of Simplicity 3965 to my wide, angled, and oddly-shaped one on the self-drafted bodice. But I had limited time to sew this past weekend and I have fantasies of wearing this dress for May Long (which is next weekend—yeah, probably not going to happen).
So I matched up the waistline, and attempted to add the shaping of the self-drafted bodice on to the Simplicity bodice. This worked fairly well for the front, not so well for the back. My self-drafted back piece is very wide, but then a lot of the width is taken in by the dart. The Simplicity bodice back is much narrower, with a correspondingly narrower dart. I can’t help but think that a narrower pattern overall would be preferable, but obviously the swayback alterations didn’t transfer with their full force. Alternatively, letting out the hips a bit more might be helpful. Part of what’s hanging me up is that “high back hip” which I still haven’t really learned to fit.
Also, in this one you can see the lovely sunburn I acquired on Mother’s Day. This is what happens when I sit back and let other people organize the day’s expedition… my mother’s day brunch turned into a two-hour wander on a new segment of riverbank, with nary a squirt of sunscreen to be seen, on the first really summery day we’ve had so far.
I’m hoping that one more muslin will be sufficient—sewing these up is quick, but annoying, and I’m running out of crappy zippers. 🙂