I hate to admit it, but I sorta love the Saturdays my hubby works (don’t tell him!). There’s nothing to do but a bit of house-cleaning, some light yelling at the children (usually over their bedrooms, but this week, for variety, it was the back yard, which somehow became encrusted in stray bits of wood and empty pop bottles over the winter*), and, of course, sewing.
This weekend’s project was, natch, Simplicity 6023, that same pattern I won in Peter’s giveaway a few weeks back. Much easier to focus now that I have the Springy Coat out of the way. Which is good, because this was definitely one of those two steps forward, one step back projects. Not because the pattern was tricky, or the instructions were bad, or the fabric was ill-behaved. No, this was all about the stripes.
You may have noticed how little print and pattern matching I do? How I will move mountains (ok, cut bits on the bias) to avoid having to line things up? Precision sewing has never been my strong suit. I’ve improved, mind you, but I still regularly fall short of my heroes. Or just plain adequacy.
I did not rip out every single seam in this thing but… well, there were a lot. A lot of perfectly good seams, too, except that the stripes were off. Well, more off than all the rest. Probably if I’d gone all couture and hand-basted everything, I could’ve gotten them mostly even. None of them are even remotely like perfect, but at least they generally line up (except across the bodice side-seams, there was no way to make that work with the amount of fabric I had.
On the up side, I conquered my first invisible zipper! And, I hate to say it, but I might actually be a convert. I used Sherry’s tutorial (though I read through Sunni’s, which is similar, and used some elements from it as well), and a regular zipper foot, and it went in like a dream. Aside from the fact that my impecise waistline stitching meant that, although I matched up the waist seam perfectly using Sherry’s tips, the stripes above the waist didn’t match up at all. So I had to rip half of it, fudge the waist a tiny bit (since it’s less visible than the stripes) and go with that. Pooh.
The slight irregularity at the top is due to my not reading Sherry’s other tute, on facing an invisible zipper, until after I’d half attached one of the facings. Silly me, thinking I’d just follow the pattern instructions… The side on the left in the photo, which I did following Sherry’s method, turned out much better. I should probably have stayed the back of neck before all the messing around, though—it’s a bit stretched out and threatens to gape.
Speaking of zippers, let me introduce you to my new best friend! A few weeks back I had lamented the inadequacy of my zipper foot, and some of you wise people had told me that there were much better fish in the sea. So last week I finally made it to the sewing-machine store, discovered that my machine is an “oscillating hook” Janome, and came home with this little gem on the right.
Isn’t that the cutest little foot ever?
By twiddling the green knob at the back, you can adjust the foot’s position to the left or right of the needle, or right in the middle for straight stitching. Perfect for edge-stitching! And, because it’s so finely adjustable, perfect for pushing up the edge of the invisible-zip coils to stitch right alongside them. Yay! I interfaced the entire zipper length plus a bit with knit fusible and had no problem with the zipper bubbling, buckling, or anything.
FIT: Despite the photo (wrinkled from being tied), the back fits really well with my little swayback adjustment (though it wreaks havoc with the stripes). Although the tie pretty much disguises most issues in this area, anyway. I made my ties extra-long, because it seemed like a good idea at the time, which turned out fun—I like pulling them around to tie in the front. A nice option to have, since often back ties drive me nuts.
With my bodice-shortening, the waist-seam falls about a thumb’s width above my natural waist, which is roughly where it’s supposed to according to the pattern, so yay! That being said, my bodice-shortening alteration raised the neckline, and I would probably have been just as happy with the lower neckline. This is a bid demure.
I did take each side-seam in about 1cm (so a total of 4cm reduction all around). This is similar to what I did on the first 70s dress; I’m not sure if it’s because I’m more of a 10 (bust measurement would suggest this but everything else says 12 or larger), ease in the dress, or, most likely, the fact that I keep using stretch wovens.
I took the same 1 1/4″ hem the pattern allowed for, but because of my fiddling pieces up and down to get the stripes to match (yes, my cutting was even less precise than my sewing!) I probably lost about an inch in length there. It’s fine, though, falling at a good spot above my knees.
I did the cuffs with the wrong side lapped out. D’oh. Figuring out which way they should lap, BEFORE the sleeve is set, was a head trip in itself—I’m actually impressed that I got them both the same way, so I’m not going to sweat it.
I had three of these vintage plastic flower buttons in one of the random button baggies I’ve picked up over the last six months. I spent a lot of time hemming and hawing over buttons (and Syo spent a lot of time making art with them while I did it, and then being irate when I broke up her faces to lay different combinations on the dress). I covered a key-chain ring with fabric to put behind the one on the yoke, which hopefully looks more centred in real-life than it
does in this photo. The third button I sewed on turned out to have a broken shank (I’m not sure how this worked since all three were held together at the shanks by thread in the button jar…); fortunately, none of the buttons are functional, so I just stitched through the holes in the flower. You can see it if you click on the photo to get the full-size.
As you can see from the outdoor photos, we are finally not only snow-free, but practically warm here today! (Temperatures were in the low teens C!!!1! That’s like, gosh, almost 60F.) And tomorrow is supposed to be even warmer… maybe I can actually wear a skirt. Or a dress…
So, another contribution to my 70s wardrobe. Although it’s not getting me any closer to fulfilling Joy’s Bellbottom Challenge. Maybe I’ll move on to the Simplicity 6602 suit next… though I think I would probably try to merge the pants legs with my Ellen pattern. I have no particular desire to mess around with high-waisted pants.
*I feel it necessary to explain that I DON’T randomly chuck my recycling around the yard… but the kids apparently think that empty bottles are the cat’s meow in playthings, especially when you can fill them with water and leave it outside to freeze and then it snows and they get buried and you have to get more and… well, it was a mess.